CAD model selection

HELP_VARIABLE

PRODUKTABBILDUNG

Produktabbildung

ARTICLE_ID

Article number

9164913

ARTICLE_NAME

Type code

Atmos GIGA-I 80/120-7,5/2-CN

MANUFACTURER_NAME

Manufacturer

WILO SE

LOD

DESCRIPTION_SHORT

Short text

Glanded pump in in-line design with flange connection

DESCRIPTION_LONG

Tender text

Single-stage glanded centrifugal pump with in-line design for pipe installation or installation on a base. Low-oscillation and low-noise monobloc design with lantern and rigidly connected standard flange motor. With forced-flow circulation, bidirectional bellows mechanical seal and cavitation-reducing impeller. From kW 37 with a cartridge mechanical seal in the back pull-out system for mechanical seal replacement without dismantling the motor. Flange with R 1/8 pressure measuring connections. All grey cast iron components are cataphoretic-coated. Pumps with motors ≥ 5.5 kW are equipped as standard with a PTC thermistor sensor for motor protection. The motor terminal box ≤ 7.5 kW can be made of metal or plastic. If a metal terminal box is absolutely necessary, please order the appropriate special variant. The motor terminal boxes > 7.5 kW are always made of metal. *Mechanical seal for pumping water up to Tmax = +140 °C. Up to T ≤ +40 °C, a glycol admixture of 20 % to 40 % by volume is permissible. An alternative mechanical seal must be provided for water-glycol mixtures with a glycol content of > 40% to max. 50% by volume and a fluid temperature of > +40 °C to max. +120 °C or other fluids that differ from water. When using water-glycol mixtures, the use of an S1 variant with a corresponding mechanical seal is generally recommended.

EF023103

With oval counterflanges

Angle to first bolt hole

22.5

Angle to first bolt hole

22.5

Angle electrical cabinet 1

Thickness flange (incl. sealing edge)

Outer diameter of flange

200

Outer diameter of flange

200

D21

Diameter bolt hole

D22

Diameter bolt hole

D41

Diameter sealing edge

132

D42

Diameter sealing edge

132

Diameter motor

258

DN1

Nominal inner diameter

DN2

Nominal inner diameter

DO1

Outer pipe diameter connection

DO2

Outer pipe diameter connection

Thickness sealing edge

Diameter pump housing

300

Pitch circle

160

Pitch circle

160

Connection length

240

Connection length

200

LE1

Height pump housing

193

LE2

Centre connection to end motor

603

LE3

Length electrical cabinet

119.0

LE4

Distance connection to beginning of motor

221.0

LE5

Distance to centre connection

117

LE6

Distance connection to electrical cabinet

LE7

Length to top side electrical cabinet

211

LE8

Width electrical cabinet

89.25

Number of bolt holes

Working length

240

Working length

200

DIAMD1

Dimensions

262.0

Dimensions

145.0

Dimensions

120

DA1

Dimensions

300.000

Dimensions

160

Dimensions

30.0

Dimensions

175

Dimensions

117

Dimensions

120.0

HB1

Dimensions

114.000

HB2

Dimensions

150.000

Dimensions

0.000

16.000

LC2

LD1

262.000

First name *
Last name *
Email *
Company *
City *

No Third-party Cookies supported

9164913